HomeTesting & Monitoring
Proof every room works, on day one and after.
We test every room before you sign off and record how each one is set. Then the hub checks every fixture once a minute, and we look after the system from our side.
Watch it run.
A simulation of a sample office, sped up about 20 times. The real hub checks every fixture once a minute.
System4 things to look at106 of 109 answering
Devices109 on this site104 online · 2 weak · 1 offline
Lights22 rooms on92 fixtures lit
Tested96 of 1098 rooms to test again
Live
Heard directlyThrough the meshCheck-inCommandLit
RoomCheck-ins · last 30Light
Open office North10 devices
100%
Open office South9 devices
100%
Meeting 2A3 devices
50%
Meeting 2B3 devices
50%
Kitchen 23 devices
100%
Corridor 25 devices
70%
Restrooms 22 devices
100%
Needs a look 4
01 stopped answeringCorridor 3
2 devices answering unsteadilyMeeting 3A, Lobby
2 devices being addedStorage 4
8 rooms to test againOffice 401, Storage 4, Open office West, Meeting 3A, Office 302, Meeting 2B, Reception, Restrooms G
Activity Lights, health, setup
20sMeeting 2A · Lit to 80% · sensor
1mCorridor 3 · 01 stopped answering
2mOpen office North · Dimmed to 50% · sensor timer
5mStorage 4 · 01 joining its room · step 2 of 3
13mBoardroom · Set to 70% · console
Set up and tested, room by room.
- Automation
Set how each room behaves.
Lights to, stays on, then dims to, holds that for. We set it to your design, then prove it with a walk test.
- Reports
Every room tested, and on record.
Room tests and walk tests, dated, in one acceptance report for your functional tester.
Everything runs on one hub.
It sits in your building and runs the lights on its own, with nothing in the cloud needed. If the internet drops, it keeps going.
In your building
Occupancy sensingLights follow people, room by room.
SchedulingWeekly times for each room.
High-end trimEvery fixture set to what its room needs.
Health checksEvery fixture, once a minute.
Energy recordsEstimated for every room and fixture.
Setup historyEvery change recorded. Roll back to any saved version.
From LuxNet
Remote visitsWe test, tune and change schedules. Every visit is logged.
Your reportsThe test report, energy data and sequence of operations.
See it on your own building.
Start with the free assessment. It comes back within 48 hours.
LuxNet Controls
Networked lighting controls, start to finish.